2023 BMW X1 Service Brakes, Hydraulic Problems

The contact owns a 2023 BMW X1. The contact received notification of NHTSA Campaign Number: 24V104000 (ELECTRONIC STABILITY CONTROL (ESC), SERVICE BRAKES, HYDRAULIC); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact stated while driving at various speeds and attempting to slow down, the brake pedal was depressed; however, there was a slight resistance while depressing the brake pedal. There was no warning light illuminated. The vehicle was not repaired. The manufacturer was not made aware of the failure. The approximate failure mileage was 1,000. VIN tool confirms parts not available.

Mileage: 1,000

The contact owns a 2023 BMW X1. The contact received notification of NHTSA Campaign Number: 24V104000 (Electronic Stability Control (ESC), Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

The contact owns a 2023 BMW X1. The contact received notification of NHTSA Campaign Number: 24V104000 (Electronic Stability Control (ESC), Service Brakes, Hydraulic); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

The contact owns a 2023 BMW X1. The contact received notification of NHTSA Campaign Number: 24V104000 (Electronic Stability Control (ESC), Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The local dealer was contacted and confirmed that parts were not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

The contact owns a 2023 BMW X1. The contact received notification of NHTSA Campaign Number: 24V104000 (ELECTRONIC STABILITY CONTROL (ESC), SERVICE BRAKES, HYDRAULIC); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available .

The contact owns a 2023 BMW X1. The contact received notification of NHTSA Campaign Number: 24V104000 (Electronic Stability Control (ESC), Service Brakes, Hydraulic); however, the part to do the recall repair was unavailable. The dealer was contacted and confirmed that parts were not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

The contact owns a 2023 BMW X1. The contact received notification of NHTSA Campaign Number: 24V104000 (ELECTRONIC STABILITY CONTROL (ESC), SERVICE BRAKES HYDRAULIC); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

The contact owns a 2023 BMW X1. The contact stated while driving 45 MPH, the contact felt an abnormal thud coming from the vehicle. The contact stated that the brake pedal depressed all the way to the floorboard before the vehicle was able to come to a complete stop. The contact stated that several unknown warning lights were illuminated. The vehicle functioned as intended while driving to the residence. The vehicle was towed to a dealer where it was diagnosed that the ESC had failed and needed to be replaced. The vehicle was repaired. The manufacturer was notified of the failure. The contact stated that the vehicle was repaired three times in a year under NHTSA Campaign Number: 24V104000 (Electronic Stability Control (ESC), Service Brakes, Hydraulic). The failure mileage was 21,730.

Mileage: 21,730

The contact owns a 2023 BMW X1. The contact stated while driving approximately 65 MPH, the message "Braking may Require Additional Force" was displayed. The contact stated that while depressing the brake pedal, the vehicle jerked forward. The vehicle was towed to the local dealer. The contact stated that the vehicle was repaired under an unknown recall. The contact stated that later while driving at an undisclosed speed, the messages "Chassis Stabilization", "4-WD", "Vehicle may Roll" were displayed and the check engine warning light illuminated. The cause of the failure was not yet determined. The failure mileage was 13,000.

Mileage: 13,000

The contact owns a 2023 BMW X1. The contact received notification of NHTSA Campaign Number: 24V104000 (Electronic Stability Control (ESC), Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The local dealer was not contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

The contact owns a 2023 BMW X1. The contact received notification of NHTSA Campaign Number: 24V104000 (Electronic Stability Control (ESC), Service Brakes, Hydraulic); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

The contact owns a 2023 BMW X1. The contact stated while driving 60 MPH in the middle lane of a freeway, the electronic parking brake engaged unintendedly, causing to vehicle to jerk to a stop. The electronic parking brake warning light was illuminated. The contact depressed the accelerator pedal and resumed normal driving; however, the failure recurred intermittently while driving. The contact was able to pull over to the side of the road. The contact stated that upon turning off and restarting the vehicle, the vehicle operated as needed while driving to the residence. The contact received notification of NHTSA Campaign Number: 24V104000 (Electronic Stability Control (ESC), Service Brakes, Hydraulic); and the vehicle was taken to the dealer, where it was determined that the failure was related to the recall. The vehicle was repaired; however, the contact was concerned about the safety of the vehicle. The manufacturer was not notified of the failure. The failure mileage was approximately 11,000.

Mileage: 11,000

The contact owns a 2023 BMW X1. The contact received notification of NHTSA Campaign Number: 24V104000 (Electronic Stability Control (ESC), Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

The contact owns a 2023 BMW X1. The contact received notification of NHTSA Campaign Number: 24V104000 (Service Brakes, Hydraulic, Electronic Stability Control - (ESC); however, the part to do the repair was unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

The contact owns a 2023 BMW X1. The contact received notification of NHTSA Campaign Number:  24V104000 ( ELECTRONIC STABILITY CONTROL (ESC), SERVICE BRAKES, HYDRAULIC) however, the part to do the repair was unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts are not available.

The contact owns a 2023 BMW X1. The contact received notification of NHTSA Campaign Number: 24V104000 (Electronic Stability Control (ESC), Service Brakes, Hydraulic) however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

The contact owns a 2023 BMW X1. The contact received notification of NHTSA Campaign Number: 24V104000 (Electronic Stability Control (ESC), Service Brakes, Hydraulic); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact stated that while driving approximately 70 MPH, the contact noticed an abnormal burning odor. The contact stated that the driver's side foot well was becoming hot. The contact stated that there was no warning light illuminated. The contact pulled over and allowed the engine to cool down. The contact stated that the brake pedal required more effort to depress, and the vehicle was taking longer to slow down. The contact stated that the failure was a recurring failure. The contact had taken the vehicle to a dealer and was advised that the parts to repair the vehicle were not available. The failure mileage was unknown. VIN tool confirms parts not available.

The contact owns a 2023 BMW X1. The contact received notification of NHTSA Campaign Number: 24V104000 (Electronic Stability Control (ESC), Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The local dealer was contacted and made aware of the issue. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact had not experienced a failure. The manufacturer was made aware of the issue. VIN tool confirms parts not available.

The contact owns a 2023 BMW X1. The contact received notification of NHTSA Campaign Number: 24V104000 (Electronic Stability Control, Service Brakes, Hydraulic) however, the part to repair was unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. Parts distribution disconnect.

The contact owns a 2023 BMW X1. The contact received notification of NHTSA Campaign Number: 24V104000 (ELECTRONIC STABILITY CONTROL (ESC), SERVICE BRAKES, HYDRAULIC); however, the part to do the recall repair was unavailable. The local dealer was contacted and it was confirmed that the part was not available. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced the failure. Parts distribution disconnect.

See attached document for complaint

The contact owns a 2023 BMW X1. The contact stated while driving at an undisclosed speed and coming to a stop at a red light, the brake pedal was depressed; however, the vehicle failed to slow down. The contact stated that several unknown warning lights were illuminated. The contact stated that the message to “Contact the Dealer" was temporarily displayed. The vehicle was taken to a local dealer where it was diagnosed that the brake booster needed to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure. The failure mileage was approximately 27,000.

Mileage: 27,000