High Severity Issue
This component has been associated with crashes, fires, or deaths.
This Problem Across All Years
When entering a left hand turn at moderate speed, the vehicle will go into a lurching, bucking, hesitation period, usually when under slight or moderate acceleration. This results in an uncontrolled wobble that will eventually smooth out but can also result in a sudden burst of power that tends to rapidly propel the vehicle further to the left unless the throttle is quickly relaxed. Hard to describe, but the sensation feels like you are being “squirted” out of the turn. I first noticed this barely a month after I took possession of the machine and thought it might be a normal handling trait. As I became more acquainted with the various user’s groups, I find it was not normal and a much more serious problem that apparently hasn’t been successfully addressed by the manufacturer over the years it has been reported. Unlike some of the others who have reported similar occurrences, my vehicle has not displayed any error codes on the display screen, nor has it gone into a limp mode. Due to these conditions, I will not take this vehicle on any road trips for fear of being stranded or involved in an accident being caused by this dangerous handling anomaly. I love this vehicle, but due to this issue, I don’t feel it is safe.
When entering a left hand turn at moderate speed, the vehicle will go into a lurching, bucking, hesitation period, usually when under slight or moderate acceleration. This results in an uncontrolled wobble that will eventually smooth out but can also result in a sudden burst of power that tends to rapidly propel the vehicle further to the left unless the throttle is quickly relaxed. Hard to describe, but the sensation feels like you are being “squirted” out of the turn. I first noticed this barely a month after I took possession of the machine and thought it might be a normal handling trait. As I became more acquainted with the various user’s groups, I find it was not normal and a much more serious problem that apparently hasn’t been successfully addressed by the manufacturer over the years it has been reported. Unlike some of the others who have reported similar occurrences, my vehicle has not displayed any error codes on the display screen, nor has it gone into a limp mode. Due to these conditions, I will not take this vehicle on any road trips for fear of being stranded or involved in an accident being caused by this dangerous handling anomaly. I love this vehicle, but due to this issue, I don’t feel it is safe.
Vehicle developed right wheel wobble on left turns over 90 degrees, when speed is ~40 mph or above. Unable to safely make turn, at speed. 3 trips to dealership, issue persists. Vehicle threw a “VSS fault” and went into “limp mode” preventing me from driving over 40mph - was in the mountains, 60 miles from home. Serious safety issue, feel unsafe on the vehicle, no longer willing to ride.
Vehicle developed right wheel wobble on left turns over 90 degrees, when speed is ~40 mph or above. Unable to safely make turn, at speed. 3 trips to dealership, issue persists. Vehicle threw a “VSS fault” and went into “limp mode” preventing me from driving over 40mph - was in the mountains, 60 miles from home. Serious safety issue, feel unsafe on the vehicle, no longer willing to ride.
Vehicle repeatedly goes in to limp mode for VSS faults related to steering codes. Dealers are unable to repair and report that many other of the same model have the same problem. Many other owners in the online community report the same issue with no fix in sight. The vehicle is essentially unusable and the manufacturer does not appear to have any intent to remedy the situation.
Vehicle repeatedly goes in to limp mode for VSS faults related to steering codes. Dealers are unable to repair and report that many other of the same model have the same problem. Many other owners in the online community report the same issue with no fix in sight. The vehicle is essentially unusable and the manufacturer does not appear to have any intent to remedy the situation.
Bike intermittently goes into limp mode for VSS fault and codes related to the steering rate/yaw sensor. Had the problem confirmed and the manufacturer-recommended steering upgrade done by local Can-am dealer but the VSS fault and limp mode still happens, intermittently. My understanding, from reading forums online, is that this is a very common issue. I would rather they turn the VSS system off entirely than than have the vehicle be nearly unusable at random intervals. Getting slowed down to a max speed of 50 mph here in AZ where most of the highway speeds are 65 mph or higher, with no warning, is quite dangerous and nerve-wracking. I live right off of a 65 mph highway so driving a bike that randomly limits itself to 50 mph is not safe, let alone convenient.
Bike intermittently goes into limp mode for VSS fault and codes related to the steering rate/yaw sensor. Had the problem confirmed and the manufacturer-recommended steering upgrade done by local Can-am dealer but the VSS fault and limp mode still happens, intermittently. My understanding, from reading forums online, is that this is a very common issue. I would rather they turn the VSS system off entirely than than have the vehicle be nearly unusable at random intervals. Getting slowed down to a max speed of 50 mph here in AZ where most of the highway speeds are 65 mph or higher, with no warning, is quite dangerous and nerve-wracking. I live right off of a 65 mph highway so driving a bike that randomly limits itself to 50 mph is not safe, let alone convenient.
At random, the bike feels like it has a severe rear wheel wobble when negotiating a left-hand curve. It's a frequent occurrence but inconsistent and unpredictable. I took it to an independent repair shop and my local dealership but the technicians were unable to duplicate the problem on their test rides.
At random, the bike feels like it has a severe rear wheel wobble when negotiating a left-hand curve. It's a frequent occurrence but inconsistent and unpredictable. I took it to an independent repair shop and my local dealership but the technicians were unable to duplicate the problem on their test rides.
On left hand turns only never right turns, if you are going over 30 mph the ABS/Stability controls turns on and make the wheels wobble and slows it down in the turn. This abrupt slow down cause vehicles behind me to slam on breaks because there is no brake lights warning them of the slow down. I took it to a shop and after a month in the shop, they replaced the yaw rate sensor which did not fix the issue. I have put the bike in the garage for a month now because it is too dangerous to drive until this issue is solved.
On left hand turns only never right turns, if you are going over 30 mph the ABS/Stability controls turns on and make the wheels wobble and slows it down in the turn. This abrupt slow down cause vehicles behind me to slam on breaks because there is no brake lights warning them of the slow down. I took it to a shop and after a month in the shop, they replaced the yaw rate sensor which did not fix the issue. I have put the bike in the garage for a month now because it is too dangerous to drive until this issue is solved.
https:// [XXX] Mine went into limp mode. Right before getting on interstate. Drops to 25 right away. Very dangerous on 65 mph highway. Back wheel wobbles when I make a turn doing around 45… INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
https:// [XXX] Mine went into limp mode. Right before getting on interstate. Drops to 25 right away. Very dangerous on 65 mph highway. Back wheel wobbles when I make a turn doing around 45… INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
When making left turns, vehicle's rear tire wobbles severely. When doing this, it also causes the handle bars to try and straighten out during the turn almost causing the vehicle to hit a curb or guardrail. This only happens on left turns, never on right turns. After incident, the rear tire suspension feels spongy. I have taken the vehicle back to the dealer for this issue. The had it for 5 weeks and could never reproduce the issue. I have also contacted Can Am BRP about this issue who only recommended that I take the vehicle back to the dealership.
When making left turns, vehicle's rear tire wobbles severely. When doing this, it also causes the handle bars to try and straighten out during the turn almost causing the vehicle to hit a curb or guardrail. This only happens on left turns, never on right turns. After incident, the rear tire suspension feels spongy. I have taken the vehicle back to the dealer for this issue. The had it for 5 weeks and could never reproduce the issue. I have also contacted Can Am BRP about this issue who only recommended that I take the vehicle back to the dealership.
My vehicle start to lose control when I drive around left or right corner the rear end felt like it was bucking or slipping. The VSS fault error and Limp Mode kicked in and the speed doesn't really matter once you are over 20 mph. My vehicle is at the dealership as of 8/13/23 to replace the pitman arm to see if that fix the problem. The VSS fault error happens about 4 times since I brought the vehicle.
My vehicle start to lose control when I drive around left or right corner the rear end felt like it was bucking or slipping. The VSS fault error and Limp Mode kicked in and the speed doesn't really matter once you are over 20 mph. My vehicle is at the dealership as of 8/13/23 to replace the pitman arm to see if that fix the problem. The VSS fault error happens about 4 times since I brought the vehicle.
I have a 2022 Can-Am Ryker 900 sport. when I purchased it around a week or two later, my left brake and wheel started squeaking loud. I returned it to the dealer. One of the service men said its brand new brakes and tires give it time to wear down.low brake warning came across the screen and my handlebars started feeling loose,a lot of play. I returned it again. They checked my handlebars and fixed my front truck and said my brand new brakes were fine. It wasn’t my handlebars. It was my suspension starting to malfunction making my left brake pad wear uneven low brake warning came across again. I returned it again for the recalls the service man assured me this will fix my problem. last night August 5,2023 I was out, riding with friends, proceeded into a curve, and my handlebars would not allow me to turn my wheels. My left wheel seemed as though it was trying to lock up. I could not turn the curve.it started to do what they call the Death turn. Two of my friends almost ran into the back of me because the bike slowed itself down, My check engine light started flashing VVS fault code came across the screen, I end up hitting the curb scratching my rim, and now the bike is on limp mode.
I have a 2022 Can-Am Ryker 900 sport. when I purchased it around a week or two later, my left brake and wheel started squeaking loud. I returned it to the dealer. One of the service men said its brand new brakes and tires give it time to wear down.low brake warning came across the screen and my handlebars started feeling loose,a lot of play. I returned it again. They checked my handlebars and fixed my front truck and said my brand new brakes were fine. It wasn’t my handlebars. It was my suspension starting to malfunction making my left brake pad wear uneven low brake warning came across again. I returned it again for the recalls the service man assured me this will fix my problem. last night August 5,2023 I was out, riding with friends, proceeded into a curve, and my handlebars would not allow me to turn my wheels. My left wheel seemed as though it was trying to lock up. I could not turn the curve.it started to do what they call the Death turn. Two of my friends almost ran into the back of me because the bike slowed itself down, My check engine light started flashing VVS fault code came across the screen, I end up hitting the curb scratching my rim, and now the bike is on limp mode.
I purchased my Ryker in June of 2022. Since my purchase I have been dealing with a death wobble in the front during left turns, a serious wobble in the rear during left turns, and continuous vss fault/Limp home mode failure. I reported the issue to the dealer and they attempted to correct the issue, but it has continued to fail. I contacted BRP the parent company, and they refused to respond. There have been 2 safety recalls and I am no longer feeling safe to ride the vehicle.
I purchased my Ryker in June of 2022. Since my purchase I have been dealing with a death wobble in the front during left turns, a serious wobble in the rear during left turns, and continuous vss fault/Limp home mode failure. I reported the issue to the dealer and they attempted to correct the issue, but it has continued to fail. I contacted BRP the parent company, and they refused to respond. There have been 2 safety recalls and I am no longer feeling safe to ride the vehicle.
Rear uncontrollable shaking, swaying on slow low 40mph gradual cornering. Caused VSS Limp mode fault. Codes C0063 and C006C. Almost lost control of the Ryker, Seems traction control or the yaw sensor is intermittently active when cornering. This time it went into limp mode.
Rear uncontrollable shaking, swaying on slow low 40mph gradual cornering. Caused VSS Limp mode fault. Codes C0063 and C006C. Almost lost control of the Ryker, Seems traction control or the yaw sensor is intermittently active when cornering. This time it went into limp mode.
The contact owns a 2022 Cam-Am Ryker. The contact received notification of NHTSA Campaign Number: 22V503000 (Steering) however, the part to do the recall repair was unavailable. The local dealer was contacted and it was confirmed that the part was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. Parts distribution disconnect.
The contact owns a 2022 Cam-Am Ryker. The contact received notification of NHTSA Campaign Number: 22V503000 (Steering) however, the part to do the recall repair was unavailable. The local dealer was contacted and it was confirmed that the part was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. Parts distribution disconnect.
The contact owns a 2022 Can-Am Ryker. The contact stated that while driving approximately 20 mph and making a right turn, the steering failed and the tricycle would not turn to cause the tricycle to crash into a parked vehicle. During the crash, the rider was thrown forward over the handlebars slamming into a concrete pillar. The contact sustained a fractured finger, and injured back and right leg. No medical treatment was performed. No police report was taken. The tricycle was destroyed a towed back to the dealer. The cause of the failure was not yet determined. The manufacturer was not yet contacted. The contact indicated that the vehicle had experienced the same failure listed in NHTSA Campaign Number: 22V503000 (Steering). The failure mileage was 15.
The contact owns a 2022 Can-Am Ryker. The contact stated that while driving approximately 20 mph and making a right turn, the steering failed and the tricycle would not turn to cause the tricycle to crash into a parked vehicle. During the crash, the rider was thrown forward over the handlebars slamming into a concrete pillar. The contact sustained a fractured finger, and injured back and right leg. No medical treatment was performed. No police report was taken. The tricycle was destroyed a towed back to the dealer. The cause of the failure was not yet determined. The manufacturer was not yet contacted. The contact indicated that the vehicle had experienced the same failure listed in NHTSA Campaign Number: 22V503000 (Steering). The failure mileage was 15.
The contact owns a 2022 CAN-AM Ryker. The contact stated that while driving at an undisclosed speed in a severe thunderstorm, he attempted to engage the turn signals to notify other drivers that he was switching lanes however, he discovered that the motorcycle had no turn signals. The dealer was notified and informed the contact that the Year, Make, and Model of the motorcycle manufactured to be sold in the USA were designed without turn signals. The contact also stated that the exhaust of the motorcycle burnt his legs since there was no heat guard installed on the motorcycle. The dealer was notified of the failure and informed the contact the motorcycle was not designed to be driven for long distances. The contact stated there were no screws between the wheels and the vendor. The contact stated that while driving in the rain, he had to reduce his speed to approximately 20 MPH, to prevent the motorcycle from losing traction control. Additionally, the glove box would become extremely hot while riding presenting a concern that important documents inside might become damaged by the heat. The vehicle was taken to the dealer for a recall repair however, the motorcycle was not repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 1,400.
The contact owns a 2022 CAN-AM Ryker. The contact stated that while driving at an undisclosed speed in a severe thunderstorm, he attempted to engage the turn signals to notify other drivers that he was switching lanes however, he discovered that the motorcycle had no turn signals. The dealer was notified and informed the contact that the Year, Make, and Model of the motorcycle manufactured to be sold in the USA were designed without turn signals. The contact also stated that the exhaust of the motorcycle burnt his legs since there was no heat guard installed on the motorcycle. The dealer was notified of the failure and informed the contact the motorcycle was not designed to be driven for long distances. The contact stated there were no screws between the wheels and the vendor. The contact stated that while driving in the rain, he had to reduce his speed to approximately 20 MPH, to prevent the motorcycle from losing traction control. Additionally, the glove box would become extremely hot while riding presenting a concern that important documents inside might become damaged by the heat. The vehicle was taken to the dealer for a recall repair however, the motorcycle was not repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 1,400.
During a turn the handlebars became loose during steering. While steering the handlebars twisted counter clockwise (this was a left hand turn) approximately 30 degrees. After pulling them back into place, they were still approximately 3 degrees off center. This happened before the bike had even 200 miles on it. My safety was put at risk by not having full steering capabilities. I took the vehicle to the dealer, and they realigned and tightened the bolt down. There were no warning lamps, or indicators of any electrical or mechanical nature to indicate a bolt was loose.
During a turn the handlebars became loose during steering. While steering the handlebars twisted counter clockwise (this was a left hand turn) approximately 30 degrees. After pulling them back into place, they were still approximately 3 degrees off center. This happened before the bike had even 200 miles on it. My safety was put at risk by not having full steering capabilities. I took the vehicle to the dealer, and they realigned and tightened the bolt down. There were no warning lamps, or indicators of any electrical or mechanical nature to indicate a bolt was loose.
VSS FAULT WITH LIMP HOME MODE CAME ON WHEN ATTEMPTING TO GET ON A HIGHWAY WITH SPEEDS GREATER THAN 55 MPH, THIS WAS THE FIRST ATTEMPT. BROUGHT IT BACK TO THE DEALER AND THEY SPENT A COUPLE DAYS FIGURING IT IN THE SERVICE DEPT. THEY SAID BAD YAW SENSOR. SO A DAY LATER GETTING ONTO A ROAD WITH SPEEDS OF 50MPH IT KICKS INTO LIMP HOME MODE AND VSS FAULT. THEN 3RD TIME JUST LEFT THE SHOP WAS 3 MILES AWAY IT DID IT AGAIN. THANK GOD NOT ON A HIGHWAY. BUT GETTING OUT ON TO A ROAD FROM A STOP AND IT CUTS OUT AND INTO LIMP HOME MODE AND VSS FAULT. ALL THE CODES ARE THE SAME. C006C C0063. 3 TIMES I ALMOST GOT HIT BY ANOTHER VEHICLE BECAUSE OF THIS NEW CAN-AM RYKER HAS ISSUES. AND IT CONTINUES. BRP IS NOT HELPING THEIR DEALERS AND DEALER TECHNICIANS TO FIX THESE PROBLEMS. MY DEALER WHO SOLD ME MY BRAND NEW 2022 CAN AM RYKER 600 ACE, HAVE GONE ABOVE AND BEYOND, THEY HAVE GIVEN ME A LOANER VEHICLE TO USE. BUT BRP IS NOT HELPING THEM RESOLVE THE ISSUES. THESE UNITS ARE GETTING DANGEROUS.
VSS FAULT WITH LIMP HOME MODE CAME ON WHEN ATTEMPTING TO GET ON A HIGHWAY WITH SPEEDS GREATER THAN 55 MPH, THIS WAS THE FIRST ATTEMPT. BROUGHT IT BACK TO THE DEALER AND THEY SPENT A COUPLE DAYS FIGURING IT IN THE SERVICE DEPT. THEY SAID BAD YAW SENSOR. SO A DAY LATER GETTING ONTO A ROAD WITH SPEEDS OF 50MPH IT KICKS INTO LIMP HOME MODE AND VSS FAULT. THEN 3RD TIME JUST LEFT THE SHOP WAS 3 MILES AWAY IT DID IT AGAIN. THANK GOD NOT ON A HIGHWAY. BUT GETTING OUT ON TO A ROAD FROM A STOP AND IT CUTS OUT AND INTO LIMP HOME MODE AND VSS FAULT. ALL THE CODES ARE THE SAME. C006C C0063. 3 TIMES I ALMOST GOT HIT BY ANOTHER VEHICLE BECAUSE OF THIS NEW CAN-AM RYKER HAS ISSUES. AND IT CONTINUES. BRP IS NOT HELPING THEIR DEALERS AND DEALER TECHNICIANS TO FIX THESE PROBLEMS. MY DEALER WHO SOLD ME MY BRAND NEW 2022 CAN AM RYKER 600 ACE, HAVE GONE ABOVE AND BEYOND, THEY HAVE GIVEN ME A LOANER VEHICLE TO USE. BUT BRP IS NOT HELPING THEM RESOLVE THE ISSUES. THESE UNITS ARE GETTING DANGEROUS.