2022 JEEP GRAND CHEROKEE Forward Collision Avoidance Problems

Issue has occurred at least 4 times: upon start, vehicle infotainment system appears in Italian language (difficult to revert to English as menu controls are now in a foreign language). Forward Collision OFF warning light illuminates on dash. Vehicle settings show all forward collision warning systems are ON. Servicing dealership has not identified any Diagnostic Trouble Codes with forward collision warning systems. Only way to reset system is dealer service via propriety manufacturer software. Multiple other Jeep Grand Cherokee owners reporting same problem: [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

The Forward collision Warning light came on again after switching to Italian. Dealership says the warranty just ran out but this multiple times this happens and clearly it has not been fixed. FCW issue

Screens switches to Italian, also screens freeze or go blank, Front Collision Warning (FCW) light illuminates and can't be turned off. Bluetooth randomly disconnects, Auto door locks don't engage; paddle shifters for manual gear selection cease functioning, pedestrian avoidance, automatic emergency braking, and high-beam assist stop working; memory seats unexpectedly adjust while driving. I have to bring the car to the dealer to fix this, this happens every 14 days or so.

Earlier this spring, when we started our 2022 Jeep Grand Cherokee, the language had changed itself to Italian, the units were metric, the ‘Forward Collision’ off icon was stuck on the dashboard. Also the paddle shifters did not work. In May, 2025, we paid $204.41 to Gary Mathews Motors in Clarksville, TN to ‘diagnose’ and ‘fix’ the issue. Fast forward to this month, and the issue happened again! They didn’t ‘fix’ anything. See forum where HUNDREDS of other owners are experiencing the same exact issues: [XXX] Also see Star bulletin regarding this issue: [XXX] From what I can see in the forums, there is no permanent fix for this issue. Despite this, Jeep/Stellantis keeps charging customers to ‘diagnose’ and ‘fix’ the issue which is a scam/fraud since they know there is no permanent fix. I have reached out to Jeep, and been promised follow-up from one of their specialists that never comes. I have all transcripts and promised timelines to expect follow up that never happen. I will attach photos where they admit they haven’t met the timeline for follow up that was communicated, and as of now, despite additional promises of communication/follow up I still have not heard from them. Having a forward collision system that does not function properly puts myself and others at risk. Also having a dash in units/language you do not understand is also a safety issue. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

The system has many errors, The primary issue is the forward collision warning indicator light is on showing that the service is off. But it isn't, you can go into the system settings and turn the service on and off without issue. The light stays on. It does work as far as I can tell also. It seems to be causing the paddle shifting to be disabled. I can't downshift going down a steep grade and am being required to use by brakes. Which can be very dangerous. It is causing another issue that I cannot recall at the moment. There is another issue with the settings of the vehicle randomly changing to Euro type metric settings. The clock changing to 24 hour, tire pressure changing to kpa? mph changing to kph, all the different unit of measurements changing over. Randomly, not at the same time but consistently every few weeks. At first it seemed like it was connected to a monthly software update, but now its random. The vehicle has been taken to a Jeep dealership in Sherman, tx about the issue of the Forward collision system and they fixed it. Then the problem reappeared a month afterward. I've called and they confirm that the correct US software is installed. I am the only driver of the vehicle, so no one else is changing the settings. I work a full time 9-5 job and do not work close to a dealership, which has become an issue for these matters. All the issues I have had with the vehicle seem to be related to them updating the software without my approval. Currently my vehicle has 71k miles on it and won't be covered by the 50k warranty. The warning light issue started after 50k miles.

randomly, and without warning, the instruments, gauges, and displays will switch into a language I do not speak or understand (Italian). Coinciding with the switch to Italian language, cluster and radio display settings revert back to default settings, auto door locks and paddle shifter becomes inoperative (with no menu to enable), pedestrian emergency brake (peb) lamp or forward collision warning (fcw) lamp turns on with no way to disable, units of measurement including speed, temperature, etc. all change, and many other random settings change as well. ***This is clearly a dangerous situation because of all the functions and gauges that change, and the fact it is difficult if not impossible to recover from this due to the language of the setting menus, and the complexity of discovering and navigating through all these changes. I have taken it to the dealer twice, and they say there is nothing they can do and to wait for a possible software update, but none has come and it has been over a year. When this happens, even if one is able to wade through all the settings menus and change setting back, some items cannot be reset (like the FCA off lamp).almost caused crash twice!!!

randomly, and without warning, the instruments, gauges, and displays will switch into a language I do not speak or understand (Italian). Coinciding with the switch to Italian language, cluster and radio display settings revert back to default settings, auto door locks and paddle shifter becomes inoperative (with no menu to enable), pedestrian emergency brake (peb) lamp or forward collision warning (fcw) lamp turns on with no way to disable, units of measurement including speed, temperature, etc. all change, and many other random settings change as well. ***This is clearly a dangerous situation because of all the functions and gauges that change, and the fact it is difficult if not impossible to recover from this due to the language of the setting menus, and the complexity of discovering and navigating through all these changes. I have taken it to the dealer twice, and they say there is nothing they can do and to wait for a possible software update, but none has come and it has been over a year. When this happens, even if one is able to wade through all the settings menus and change setting back, some items cannot be reset (like the FCA off lamp).almost caused crash twice!!!

Randomly, & without warning, the instrument cluster & Uconnect display will glitch and flicker off then on but switch into language I do not speak or understand (Italian). Coinciding with language switch, instrument cluster & radio display settings revert back to default settings, paddle shifter becomes inoperative (with no menu option to enable), forward collision warning (fcw) lamp turns on with no way to disable, units of measurement including speed, temperature, etc. all change & menu option to switch units back to Fahrenheit gone, auto tilting mirrors in reverse off . ***This is clearly a dangerous situation because of all the functions &gauges that change while driving & the fact it is difficult if not impossible to recover from this due to the language of the setting menus, & the complexity of finding & navigating menus to try to wade through all the settings menus &change setting back, some items cannot be reset (like the FCA off lamp and temp units). I have taken it to the dealer for diagnostic, they found no error codes but found service bulletin S210800193 and S2108000221 performed IPC Customer programmable features Configuration to temporarily correct the issue, but it happened again 3 weeks later. I had to pay $254 for this service, and the issue isn't fixed. Here is an example forum discussion, indicating many if not all vehicles are affected: https://www.jeepgarage.org/threads/forward-collision-warning-off-light-is-stuck-on.250301/#replies Many people on the forum believe this issue did not start until a software update a year or so ago. This is a well known and widespread problem, and there is even a DOT Bulletin on the issue: dot.report Bulletins https://dot.report/bulletins/11006236 Because this is dangerous and very distracting while driving (for settings/gauges/units to no longer be useful while driving), and it occurs randomly, I strongly believe this issue should be a manufacturer recall. I am available for any needs.

Randomly, and without warning, the instruments, gauges, and displays will switch into a language I do not speak or understand (Italian). Coinciding with the switch to Italian language, cluster and radio display settings revert back to default settings, auto door locks and paddle shifter becomes inoperative (with no menu to enable), pedestrian emergency brake (peb) lamp or forward collision warning (fcw) lamp turns on with no way to disable, units of measurement including speed, temperature, etc. all change, and many other random settings change as well. ***This is clearly a dangerous situation because of all the functions and gauges that change, and the fact it is difficult if not impossible to recover from this due to the language of the setting menus, and the complexity of discovering and navigating through all these changes. I have taken it to the dealer 7 times, and they say there is nothing they can do and to wait for a possible software update, but none has come and it has been over two years. When this happens, even if one is able to wade through all the settings menus and change setting back, some items cannot be reset (like the FCA off lamp). According to various Jeep owner forums, some dealers have been able to reset something and temporarily correct the issue, but they charge for this service, and the issue returns randomly again. Here is an example forum discussion, indicating many if not all vehicles are affected: [XXX] Many people on the forum believe this issue did not start until a software update a year or so ago. This is a well known and widespread problem, and there is even a DOT Bulletin on the issue: dot.report Bulletins Because this is dangerous (for settings/gauges/units to no longer be useful while driving), and it occurs randomly, I strongly believe this issue should be a manufacturer recall. I am available for any needs. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

While driving all warning lights were activated and power steering completely failed. The vehicle was in drive and fully charged

While driving on a local neighborhood street at approximately 38 miles per hour, ( cruise control possibly engaged) , all the lights on my dashboard suddenly illuminated. A messages appeared stating that service was required for every guidance and braking system. At that moment I became concerned, so I attempted to use the brake. Despite pressing the brake pedal as hard as I could, the car did not slow down. I cannot remember if I downshifted using the paddle shifters on the steering wheel, but I was able to coast to a manageable speed and pull into a parking lot. I then turned the vehicle off and on again, but all the warning lights remained on the dashboard. After waiting for about five minutes, the vehicle was restarted, and this time none of the warning lights were on. Since I was very close to home, I drove the rest of the way very slowly. Later, I searched online and discovered that other people have experienced this same problem. Some of the information I read suggested that water can get into a component, and it had been raining on the day of the incident and the day before. My primary safety concern is what would have happened if I had been approaching a stoplight or driving on a freeway where I needed to stop suddenly. I am confident that I would not have been able to stop in time to avoid a crash. It is frightening to think of what could happen if a child were to run into the street and this happening. I immediately made an appointment with my local Jeep dealership. The dealer has since driven the vehicle 98 miles but has not yet been able to replicate the issue.

This happened 4 tines before Randomly, and without warning, the instruments, gauges, and displays will switch into a language I do not speak or understand (Italian). Coinciding with the switch to Italian language, cluster and radio display settings revert back to default settings, auto door locks and paddle shifter becomes inoperative (with no menu to enable), pedestrian emergency brake (peb) lamp or forward collision warning (fcw) lamp turns on with no way to disable, units of measurement including speed, temperature, etc. all change, and many other random settings change as well. ***This is clearly a dangerous situation because of all the functions and gauges that change, and the fact it is difficult if not impossible to recover from this due to the language of the setting menus, and the complexity of discovering and navigating through all these changes. I have taken it to the dealer twice, and they say there is nothing they can do and to wait for a possible software update, but none has come and it has been over a year. When this happens, even if one is able to wade through all the settings menus and change setting back, some items cannot be reset (like the FCA off lamp). According to various Jeep owner forums, some dealers have been able to reset something and temporarily correct the issue, but they charge for this service, and the issue returns randomly again. Here is an example forum discussion, indicating many if not all vehicles are affected: [XXX] Many people on the forum believe this issue did not start until a software update a year or so ago. This is a well known and widespread problem, and there is even a DOT Bulletin on the issue: dot.report Bulletins Because this is dangerous (for settings/gauges/units to no longer be useful while driving), and it occurs randomly, I strongly believe this issue should be a manufacturer recall. I am available for any needs." INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

On April 12th my husband and I were driving our Jeep after it had a recall and update to fix the recall of a battery issue on all 4xE models. We were doing 45 mph down the road and it threw an error code that said “Service Hybrid Electric Vehicle System”, “Service Emergency Braking System” the Jeep then shut off and said for us to push the brake and press start for us to turn the car on in the middle of the road. We were able to safely get off the road, when we came to a stop the car put itself into park automatically. We had to start it a couple of times to make sure it was ok to turn around and drive home. It was then towed to the dealership. They told us they could see the issue logged in the system but they could not replicate the same issue after driving it. They told us that we had to come and pick up the Jeep and I told them how unsafe that made me feel for us and everyone on the road. They told us there’s nothing they could do for us. We got the car back and another issue arose where are Passive Entry Switch became corroded and our car kept unlocking itself throughout the night. The day we got it back from them we were driving it and we got the same “Service Hybrid Electric Vehicle System” again. So I brought our Jeep back again and they told me in the service department they’ve been working with the engineers at Jeep and they are waiting for an update to fix it and it’s one of four in the area with this issue and Jeep is fully aware of the severity of the issue. They also told me they would be holding on to our car until it’s fixed. I was called by the head of the service department at that dealership and was told they need their loaner car back and they got word they’ll maybe have a fix for our car in November. They knowingly gave us our completely unsafe Jeep back and told us to try for Lemon Law - with all parties knowing the severity of the security and lives put at risk on the road. We have gotten this error code many times and are told there is no fix

I have code B273C-00 digital crash input on my jeep. This is the code dealerships were informed if they see this code the vehicles have to be grounded. At this time, there is no remedy for the grand cherokees. The dealership can't release my jeep back due to safety reasons, and it's been with them for over an month and counting.

After having my 22 Jeep Grand Cherokee at OBX Jeep in NC for over 10 months for electrical and camera issues it was shipped to Brown Daub Jeep in Easton, PA for overdue PA State Inspection due to the length of the repair in NC. Supposedly OBX Jeep said it was repaired but car immediately had electrical issues including FCW OFF dash light. The PA Jeep dealer corrected electrical issues following Jeep Star Publication and it was returned to me July 3, 2025. FCW OFF dash light has come back on on [XXX] and OBX Jeep is indicating I must again leave it with them to further diagnose the issue. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

"Randomly, and without warning, the instruments, gauges, and displays will switch into a language I do not speak or understand (Italian). Coinciding with the switch to Italian language, cluster and radio display settings revert back to default settings, pedestrian emergency brake (peb) lamp or forward collision warning (fcw) lamp turns on with no way to disable, units of measurement including speed, temperature, etc. all change, and many other random settings change as well. ***This is clearly a dangerous situation because of all the functions and gauges that change, and the fact it is difficult if not impossible to recover from this due to the language of the setting menus, and the complexity of discovering and navigating through all these changes. I have taken the vehicle to the dealer recently and they performed an update when the radio was blank and AM radio failed to function. When this happens, even if one is able to wade through all the settings menus and change setting back, some items cannot be reset (like the FCA off lamp). According to various Jeep owner forums, some dealers have been able to reset something and temporarily correct the issue, but they charge for this service, and the issue returns randomly again. Here is an example forum discussion, indicating many if not all vehicles are affected: [XXX] Many people on the forum believe this issue did not start until a software update a year or so ago. This is a well known and widespread problem, and there is even a DOT Bulletin on the issue: dot.report Bulletins Because this is dangerous (for settings/gauges/units to no longer be useful while driving), and it occurs randomly, I strongly believe this issue should be a manufacturer recall. I am available for any needs." INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

Instrument panel switches to Italian, forward collision off light gets stuck on and my seat moved abruptly while I was driving down the road. I have taken my Jeep into the dealership last year for this problem, it was “fixed” but has come back. Noticed the light stuck on last week. Today while I was driving the panel changed to Italian and my seat moved abruptly. Many people on online forums express experiencing the same problem.

"Randomly, and without warning, the instruments, gauges, and displays will switch into a language I do not speak or understand (Italian). Coinciding with the switch to Italian language, cluster and radio display settings revert back to default settings, auto door locks and paddle shifter becomes inoperative (with no menu to enable), pedestrian emergency brake (peb) lamp or forward collision warning (fcw) lamp turns on with no way to disable, units of measurement including speed, temperature, etc. all change, and many other random settings change as well. ***This is clearly a dangerous situation because of all the functions and gauges that change, and the fact it is difficult if not impossible to recover from this due to the language of the setting menus, and the complexity of discovering and navigating through all these changes. I have taken it to the dealer twice, and they say there is nothing they can do and to wait for a possible software update, but none has come and it has been over a year. When this happens, even if one is able to wade through all the settings menus and change setting back, some items cannot be reset (like the FCA off lamp). According to various Jeep owner forums, some dealers have been able to reset something and temporarily correct the issue, but they charge for this service, and the issue returns randomly again. Here is an example forum discussion, indicating many if not all vehicles are affected: [XXX] Many people on the forum believe this issue did not start until a software update a year or so ago. This is a well known and widespread problem, and there is even a DOT Bulletin on the issue: dot.report Bulletins Because this is dangerous (for settings/gauges/units to no longer be useful while driving), and it occurs randomly, I strongly believe this issue should be a manufacturer recall. I am available for any needs INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

Without warning or being given an option to reject the update, my vehicle was updated to settings that no longer offer paddle shifting or the ability to enable or disable the Pedestrian Emergency Braking (PEB) system. The latter results in being unable to turn off the Forward Collision Off light on the dashboard. The update also wiped out most of my settings and changed units of measure to the metric system. According to various Jeep owner forums, some dealers have been able to reset something and temporarily correct the issue, but they charge for this service, and the issue returns randomly again. Here is an example forum discussion, indicating many if not all vehicles are affected: [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

Randomly, and without warning, the instruments, gauges, and displays will switch into a language I do not speak or understand (Italian). Coinciding with the switch to Italian language, cluster and radio display settings revert back to default settings, auto door locks and paddle shifter becomes inoperative (with no menu to enable), pedestrian emergency brake (peb) lamp or forward collision warning (fcw) lamp turns on with no way to disable, units of measurement including speed, temperature, etc. all change, and many other random settings change as well. ***This is clearly a dangerous situation because of all the functions and gauges that change, and the fact it is difficult if not impossible to recover from this due to the language of the setting menus, and the complexity of discovering and navigating through all these changes. When this happens, even if one is able to wade through all the settings menus and change setting back, some items cannot be reset (like the FCA off lamp). According to various Jeep owner forums, some dealers have been able to reset something and temporarily correct the issue, but they charge for this service, and the issue returns randomly again. Here is an example forum discussion, indicating many if not all vehicles are affected: [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

Randomly, and without warning, the instruments, gauges, and displays will switch into a language I do not speak or understand (Italian). Coinciding with the switch to Italian language, cluster and radio display settings revert back to default settings, auto door locks and paddle shifter becomes inoperative (with no menu to enable), pedestrian emergency brake (peb) lamp or forward collision warning (fcw) lamp turns on with no way to disable, units of measurement including speed, temperature, etc. all change, and many other random settings change as well. ***This is clearly a dangerous situation because of all the functions and gauges that change, and the fact it is difficult if not impossible to recover from this due to the language of the setting menus, and the complexity of discovering and navigating through all these changes. When this happens, even if one is able to wade through all the settings menus and change setting back, some items cannot be reset (like the FCA off lamp). According to various Jeep owner forums, some dealers have been able to reset something and temporarily correct the issue, but they charge for this service, and the issue returns randomly again. Here is an example forum discussion, indicating many if not all vehicles are affected: [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

Randomly, and without warning, the instruments, gauges, and displays will switch into a language I do not speak or understand (Italian). Coinciding with the switch to Italian language, cluster and radio display settings revert back to default settings, auto door locks and paddle shifter becomes inoperative (with no menu to enable), pedestrian emergency brake (peb) lamp or forward collision warning (fcw) lamp turns on with no way to re-enable safety features, units of measurement including speed, temperature, etc. all change, and many other random settings change as well. ***This is clearly a dangerous situation because of all the functions and gauges that change, and the fact it is difficult if not impossible to recover from this due to the language of the setting menus, and the complexity of discovering and navigating through all these changes. I have taken it to the dealer four times. They provide fix that last a week, then say there is nothing they can do and to wait for a possible software update, but none has come and it has been almost a year. When this happens, even if one is able to wade through all the settings menus and change setting back, some items cannot be reset (like the FCA off lamp). According to various Jeep owner forums, some dealers have been able to reset something and temporarily correct the issue, but they charge for this service, and the issue returns randomly again. Here is an example forum discussion, indicating many if not all vehicles are affected: [XXX] Because this is dangerous (for settings/gauges/units to no longer be useful while driving), and it occurs randomly, I strongly believe this issue should be a manufacturer recall. I am available for any needs and have all paperwork from the four Jeep visits. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

Randomly, and without warning, the instruments, gauges, and displays will switch into a language I do not speak or understand (Italian). Coinciding with the switch to Italian language, cluster and radio display settings revert back to default settings, auto door locks and paddle shifter becomes inoperative (with no menu to enable), pedestrian emergency brake (peb) lamp or forward collision warning (fcw) lamp turns on with no way to re-enable safety features, units of measurement including speed, temperature, etc. all change, and many other random settings change as well. ***This is clearly a dangerous situation because of all the functions and gauges that change, and the fact it is difficult if not impossible to recover from this due to the language of the setting menus, and the complexity of discovering and navigating through all these changes. I have taken it to the dealer four times. They provide fix that last a week, then say there is nothing they can do and to wait for a possible software update, but none has come and it has been almost a year. When this happens, even if one is able to wade through all the settings menus and change setting back, some items cannot be reset (like the FCA off lamp). According to various Jeep owner forums, some dealers have been able to reset something and temporarily correct the issue, but they charge for this service, and the issue returns randomly again. Here is an example forum discussion, indicating many if not all vehicles are affected: [XXX] Because this is dangerous (for settings/gauges/units to no longer be useful while driving), and it occurs randomly, I strongly believe this issue should be a manufacturer recall. I am available for any needs and have all paperwork from the four Jeep visits. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

The vehicle in September of 2024 after a software update randomly changed the settings. The forward collision off warning light remains on (in settings the forward collision is "on", the language changed to Italian, the paddle shifters stopped working, the units changed, and the grid for the backup camera was turned off). I had it serviced at Jeep. They reset the vehicle which temporarily fixed the issue, however, 3 weeks later it happened again. There is a known MOPAR/star case number S2108000249. This is also reported in Jeep Forum. My safety is at risk due to the failure of the forward collision warning light/software malfunction. I feel that I am at risk for a forward collision. Also the paddle shifters don't work.

I have some major safety concerns with my 2022 Jeep Grand Cherokee, specifically with the AEB. Today was the SECOND time that my automatic emergency braking came on while I’m driving down the highway at 60 mph. The first time was in November. The roads were dry, no other cars coming toward me, driving on a straight stretch, with one car a safe distance behind. My jeep went from 60 to 0 slamming on the brakes so hard and flashing the AEB lights and dinging on the dash. Seat belts locked up tight and gave you a hard fast whip lash forward. Very terrifying like what is even happening?! The car behind me thank goodness had enough time to slam on their brakes and not rear end me! As fast as you could even comprehend what was happening, the lights and dinging stop and you can drive again. I was like maybe a leaf or something blew over the sensor and kind of wrote it off because nothing came up on my Jeep app. Fast forward to today, February 25th. Again roads are dry, no one is coming towards me, driving 60 mph in a straight stretch and wham the auto emergency brakes slam on again! Hard brake from 60-0 mph. AEB lights flashing and dinging, locking seat belts and whiplashing your head forward as you screech to an uncontrolled stop. I had absolutely no control over my brakes or gas! This time I’m livid bc my children were in the car with me! Thank goodness everyone was properly wearing seatbelts and in car seats, and I had both hands on the steering wheel, and it was not on a bend in the road because this could have been very dangerous and not ended well! This is NOT ok and there is nothing at all that blocked a sensor or would have had any reason to cause the Jeep to engage this feature. I should not have to be afraid to drive my Jeep and now it’s literally terrifying to drive it bc you never know if it’s going to happen. It needs addressed and fixed ASAP and all Jeep owners should be made aware of this very dangerous situation!

The Adaptive Cruise Control and Automatic Emergency Braking have not worked properly for over a year. Sometimes I get a message that the AEB/ACC is not working and to see the Dealer other times i have a light lit showing it is not working. On some occasions there are no signs of it not working but ate ACC works like the regular cruise control and does not slow the car down unless you apply the brake. The car has been to the dealer 2 pervious times with no long term fix it is now there again out of warrantee waiting to be fixed. last time was 05/06/24

The Adaptive Cruise Control and Automatic Emergency Braking have not worked properly for over a year. Sometimes I get a message that the AEB/ACC is not working and to see the Dealer other times i have a light lit showing it is not working. On some occasions there are no signs of it not working but ate ACC works like the regular cruise control and does not slow the car down unless you apply the brake. The car has been to the dealer 2 pervious times with no long term fix it is now there again out of warrantee waiting to be fixed. last time was 05/06/24

The contact owns a 2022 Jeep Grand Cherokee. The contact stated that while driving at an undisclosed speed, the forward warning collision light illuminated. The vehicle was taken to the dealer, who determined that a system reset was needed following an over the air software update. The vehicle was repaired but the failure reoccurred. The manufacturer was notified of the failure but provided no assistance instead advising the the contact to take the vehicle back to the dealer. The failure mileage was 41,000.

My Jeep, when using adaptive cruise control, will occasionally apply emergency breaking when a vehicle passes alongside me in an adjacent lane in the same direction of travel. I’ve had other cars directly behind me when this happens and it appears to other drivers like I’m “break checking” them. Usually it’s triggered when the passing adjacent vehicle is a tractor trailer or a truck pulling a trailer. Furthermore, the actual early warning forward crash detection does not work at all. I have no warning lights alerting me of a malfunction.

My Jeep, when using adaptive cruise control, will occasionally apply emergency breaking when a vehicle passes alongside me in an adjacent lane in the same direction of travel. I’ve had other cars directly behind me when this happens and it appears to other drivers like I’m “break checking” them. Usually it’s triggered when the passing adjacent vehicle is a tractor trailer or a truck pulling a trailer. Furthermore, the actual early warning forward crash detection does not work at all. I have no warning lights alerting me of a malfunction.

While traveling/driving with the ADAS on, the brakes slam on detecting a front end impact. The dash board disappears and the word BRAKE in all red capital lettering with a very loud beeping coming through the speakers happens. The first time it happened was in Oct of 2023 and has happened every time I travel using the ADAS. I have made an appt every time I’ve gotten back to town after traveling to have it looked at. #1 I’ve been told they can’t find a problem with it, #2 It’s been recalibrated 3 times and the service manager even asked for my permission to take my vehicle to his personal home for the weekend so that he could follow the FCA guidelines after it was recalibrated because it had to sit for a time period before it was drove. My Jeep App can show the history of its location. While traveling home the weekend of April 26, 2024 the brakes slammed on 3 times simultaneously causing all traffic behind me to lock up their brakes. Had I gotten hit I would’ve become a human pin ball across 3 lanes of Interstate 80/90. When I pulled off on the side of road so did the vehicle who almost hit me, I was so shook up I was in tears #3 I got told to not use the feature since I knew there was a problem, #4 I asked if there was something they could install to record what’s going on #5 they finally installed an “In flight recording module” the time before I drove home but upon return saying it recorded information but that they don’t know the reason why it’s doing it or how to fix it. I’ve never received a single invoice from the dealership when I’ve taken it in for this EVER!!!! I’ve only been told they have “Star cases” on it and that is enough to prove its a “buy back or lemon”, the last message I received from a Service Rep at the dealership was from Jul 25, 2024 about seeking a buy back. I sent a message today (Aug 25, 2024) asking for a plan or solution to this problem. I’ve heard nothing yet again from anyone!!!!!! I’m beyond frustrated!!!!!!!!!

While traveling/driving with the ADAS on, the brakes slam on detecting a front end impact. The dash board disappears and the word BRAKE in all red capital lettering with a very loud beeping coming through the speakers happens. The first time it happened was in Oct of 2023 and has happened every time I travel using the ADAS. I have made an appt every time I’ve gotten back to town after traveling to have it looked at. #1 I’ve been told they can’t find a problem with it, #2 It’s been recalibrated 3 times and the service manager even asked for my permission to take my vehicle to his personal home for the weekend so that he could follow the FCA guidelines after it was recalibrated because it had to sit for a time period before it was drove. My Jeep App can show the history of its location. While traveling home the weekend of April 26, 2024 the brakes slammed on 3 times simultaneously causing all traffic behind me to lock up their brakes. Had I gotten hit I would’ve become a human pin ball across 3 lanes of Interstate 80/90. When I pulled off on the side of road so did the vehicle who almost hit me, I was so shook up I was in tears #3 I got told to not use the feature since I knew there was a problem, #4 I asked if there was something they could install to record what’s going on #5 they finally installed an “In flight recording module” the time before I drove home but upon return saying it recorded information but that they don’t know the reason why it’s doing it or how to fix it. I’ve never received a single invoice from the dealership when I’ve taken it in for this EVER!!!! I’ve only been told they have “Star cases” on it and that is enough to prove its a “buy back or lemon”, the last message I received from a Service Rep at the dealership was from Jul 25, 2024 about seeking a buy back. I sent a message today (Aug 25, 2024) asking for a plan or solution to this problem. I’ve heard nothing yet again from anyone!!!!!! I’m beyond frustrated!!!!!!!!!

While traveling/driving with the ADAS on, the brakes slam on detecting a front end impact. The dash board disappears and the word BRAKE in all red capital lettering with a very loud beeping coming through the speakers happens. The first time it happened was in Oct of 2023 and has happened every time I travel using the ADAS. I have made an appt every time I’ve gotten back to town after traveling to have it looked at. #1 I’ve been told they can’t find a problem with it, #2 It’s been recalibrated 3 times and the service manager even asked for my permission to take my vehicle to his personal home for the weekend so that he could follow the FCA guidelines after it was recalibrated because it had to sit for a time period before it was drove. My Jeep App can show the history of its location. While traveling home the weekend of April 26, 2024 the brakes slammed on 3 times simultaneously causing all traffic behind me to lock up their brakes. Had I gotten hit I would’ve become a human pin ball across 3 lanes of Interstate 80/90. When I pulled off on the side of road so did the vehicle who almost hit me, I was so shook up I was in tears #3 I got told to not use the feature since I knew there was a problem, #4 I asked if there was something they could install to record what’s going on #5 they finally installed an “In flight recording module” the time before I drove home but upon return saying it recorded information but that they don’t know the reason why it’s doing it or how to fix it. I’ve never received a single invoice from the dealership when I’ve taken it in for this EVER!!!! I’ve only been told they have “Star cases” on it and that is enough to prove its a “buy back or lemon”, the last message I received from a Service Rep at the dealership was from Jul 25, 2024 about seeking a buy back. I sent a message today (Aug 25, 2024) asking for a plan or solution to this problem. I’ve heard nothing yet again from anyone!!!!!! I’m beyond frustrated!!!!!!!!!

A service was scheduled to repair the rear view camera visibility in which the dealership failed to complete. The recall repair performed did not fix the situation. The rear view camera still shows up as a blue screen as well as the parksense sensors not working at all. This is a huge safety issue as nothing is shown when backing up and no sensors work. This problem occurred randomly while starting the vehicle and has not worked since then.

A service was scheduled to repair the rear view camera visibility in which the dealership failed to complete. The recall repair performed did not fix the situation. The rear view camera still shows up as a blue screen as well as the parksense sensors not working at all. This is a huge safety issue as nothing is shown when backing up and no sensors work. This problem occurred randomly while starting the vehicle and has not worked since then.

While passing through an intersection the AEB brought the vehicle to a full stop despite no forward traffic or obstructions. Warning system lights lights for other systems (traction control, airbags, etc.) lit up in the dash. A vehicle traveling behind nearly collided in light of the unwarranted braking. After coming to a complete stop the vehicle released the brake on its own and shut off the other system warning lights. Normal operation ensued.

[XXX] I was backing out of a parking spot on the 4th floor of the parking garage at work when my car displayed an SOS on the radio monitor and then my Jeep Grand Cherokee shut off and would not restart. I then had to call parking for my job to redirect traffic because I was preventing other vehicles from exiting the garage because my vehicle was unable to restart and I had to have it towed back to the dealership in Waynesboro GA and pay $120 to have this done. i waited over an hour for a tow truck to come and it is still unclear why this keeps happening. I am afraid that the next time it happens I may loss my life. I also called the dealership and Jeep wave to see if there was a way to restart the Jeep but no one was able to assist with the request. The vehicle is really becoming a problem for me. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

While driving on the highway with the adaptive cruise control set to 77mph, the forward collision alert went off and tapped the brakes while passing a vehicle towing a trailer in the lane to the right. looking back at video on my dash cam, there was nothing in the road that should have set off the warning and the other vehicle was within their lane the entire time. I have had several false warnings in the past but this was the first time it applied the brakes.

While driving on the highway with the adaptive cruise control set to 77mph, the forward collision alert went off and tapped the brakes while passing a vehicle towing a trailer in the lane to the right. looking back at video on my dash cam, there was nothing in the road that should have set off the warning and the other vehicle was within their lane the entire time. I have had several false warnings in the past but this was the first time it applied the brakes.

- my spare tire, lane assist, and/or emergency breaking, which none went into effect during the incident. - I was forced off the road where I collided with a parked car on the side of the street, which led me to being taken by ambulance to the local hospital. - Not yet, my vehicle is currently at a body shop being repaired. - I asked my Insurance to investigate when they went for the appraisal, but am unsure if it was done. - No warnings were given prior to the collision.

My car just put on the emergency brakes/forward collision warning while I was driving down the road out of nowhere and slammed on the brakes.

The Forward Collision Warning light comes on display cluster during start indicating it is turned off. Adaptive Cruise Control does not appear to be working because it doesn't give warning upon closing in on the vehicle in front of my vehicle and I have had to react by tapping brake to turn the cruise off. Parking Collision Warning works intermittently. These problems showed up after a software update done at dealership. When I took it in recently was told they could not find any problems.

The Forward Collision Warning light comes on display cluster during start indicating it is turned off. Adaptive Cruise Control does not appear to be working because it doesn't give warning upon closing in on the vehicle in front of my vehicle and I have had to react by tapping brake to turn the cruise off. Parking Collision Warning works intermittently. These problems showed up after a software update done at dealership. When I took it in recently was told they could not find any problems.

Vehicle sets automatic brake when backing up. The back up camera turns red as if something was blocking when nothing is there. When attempting to go in reverse the car kept stoping on its own and putting the emergency break on. It took multiple attempts to get out of the parking lot and has happened more than once.

Had multiple close encounters with vehicles in front of us suddenly stopping and no response from system, Also front parking sensors do not indicate when approaching an object until almost in contact, might get a visual on dash cluster, then a the audible afterwards, long time in between Getting back in vehicle and starting ti leave, now sensors are both visual and beeping One more item, using the self parking feature, gad to apply brakes before feeling that our vehicle was going to hit vehicle behind us in spot

Had multiple close encounters with vehicles in front of us suddenly stopping and no response from system, Also front parking sensors do not indicate when approaching an object until almost in contact, might get a visual on dash cluster, then a the audible afterwards, long time in between Getting back in vehicle and starting ti leave, now sensors are both visual and beeping One more item, using the self parking feature, gad to apply brakes before feeling that our vehicle was going to hit vehicle behind us in spot

Twice in the last month I was driving to work on a two lane road without any objects in the roadway and the forward collision warning system automatically applied the breaks hard enough for my coffee to splash out of my coffee cup. It occurred at almost the same spot on the road. However, I drive this road at least twice a day. I'm concerned that it might apply the breaks randomly while driving on the highway, thus causing an accident. I have reported it to the dealer. Despite me relaying my safety concern to them, I am unable to get an appointment until July 8th.

Twice in the last month I was driving to work on a two lane road without any objects in the roadway and the forward collision warning system automatically applied the breaks hard enough for my coffee to splash out of my coffee cup. It occurred at almost the same spot on the road. However, I drive this road at least twice a day. I'm concerned that it might apply the breaks randomly while driving on the highway, thus causing an accident. I have reported it to the dealer. Despite me relaying my safety concern to them, I am unable to get an appointment until July 8th.