This Problem Across All Years
My father has the same year mini cooper and has a recall on the foot control module. He actually just got it fixed even though he hadn't had any issues with it yet. My mini has had the foot control module go bad. My car is unusable. I have no interior lights, no dash lights, no turn signals, no blowers, the windows controls don't work. I had to drive it once because I hit a deer with my other vehicle and nearly got rear ended because they didn't know I was turning and it over heated............ I do not understand why my dad got a recall and I haven't. Please HELP
My father has the same year mini cooper and has a recall on the foot control module. He actually just got it fixed even though he hadn't had any issues with it yet. My mini has had the foot control module go bad. My car is unusable. I have no interior lights, no dash lights, no turn signals, no blowers, the windows controls don't work. I had to drive it once because I hit a deer with my other vehicle and nearly got rear ended because they didn't know I was turning and it over heated............ I do not understand why my dad got a recall and I haven't. Please HELP
The contact owns a 2011 Mini Cooper S Countryman. The contact stated that while the vehicle was parked, the battery became drained. The contact replaced the battery. The contact stated that after replacing the battery, the turn signals and brake lights failed to work as needed. No warning lights were illuminated. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The manufacturer was made aware of the failure and advised the contact to get the vehicle shipped to a dealer. The failure mileage was approximately 119,000.
The contact owns a 2011 Mini Cooper S Countryman. The contact stated that while the vehicle was parked, the battery became drained. The contact replaced the battery. The contact stated that after replacing the battery, the turn signals and brake lights failed to work as needed. No warning lights were illuminated. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The manufacturer was made aware of the failure and advised the contact to get the vehicle shipped to a dealer. The failure mileage was approximately 119,000.
The contact owns a 2011 Mini Cooper S Countryman. The contact stated while parked there was white smoke coming from the rear of the vehicle. The vehicle was taken to a dealer to be diagnosed. The contact was informed that the battery and CS module needed to be replaced. The contact stated that an unknown warning light was illuminated. The vehicle was not repaired. The manufacturer was not notified of the failure. The approximate failure mileage was 79,000.
The contact owns a 2011 Mini Cooper S Countryman. The contact stated while parked there was white smoke coming from the rear of the vehicle. The vehicle was taken to a dealer to be diagnosed. The contact was informed that the battery and CS module needed to be replaced. The contact stated that an unknown warning light was illuminated. The vehicle was not repaired. The manufacturer was not notified of the failure. The approximate failure mileage was 79,000.
AFTER A BATTERY FAILURE (LOSS OF CHARGE OR BATTERY REPLACEMENT) CRITICAL SAFETY FEATURES ARE DISABLED UNTIL THE CAR IS RETURNED TO A DEALER TO "PROGRAM THE NEW BATTERY". THE SAFETY FEATURES THAT ARE DISABLED INCLUDE: 1) TURN SIGNALS, 2) 4 WAY FLASHERS, 3) FRONT WINDOWS LOWERING, 3) CONTROL OF THE HEADLIGHTS (NO CONTROL OF DIMS AND BRIGHT LIGHTS), AND 4) DASH LIGHTS (CAN'T SEE THE SPEEDOMETER). WHILE A SIMPLE WARNING LIGHT IN THIS SITUATION WOULD WORK, THE MANUFACTURER CHOSE TO DISABLE CRITICAL SAFETY FUNCTIONS OF THE CAR. IN MY CASE, ITS A 1 1/2 DRIVE IN AN UNSAFE CAR TO GET THE SITUATION CORRECTED. THIS SITUATION IS BEING EXPERIENCED BY OTHER DRIVERS AND OTHERS CAN BE FOUND WITH A SIMPLE GOOGLE SEARCH.
AFTER A BATTERY FAILURE (LOSS OF CHARGE OR BATTERY REPLACEMENT) CRITICAL SAFETY FEATURES ARE DISABLED UNTIL THE CAR IS RETURNED TO A DEALER TO "PROGRAM THE NEW BATTERY". THE SAFETY FEATURES THAT ARE DISABLED INCLUDE: 1) TURN SIGNALS, 2) 4 WAY FLASHERS, 3) FRONT WINDOWS LOWERING, 3) CONTROL OF THE HEADLIGHTS (NO CONTROL OF DIMS AND BRIGHT LIGHTS), AND 4) DASH LIGHTS (CAN'T SEE THE SPEEDOMETER). WHILE A SIMPLE WARNING LIGHT IN THIS SITUATION WOULD WORK, THE MANUFACTURER CHOSE TO DISABLE CRITICAL SAFETY FUNCTIONS OF THE CAR. IN MY CASE, ITS A 1 1/2 DRIVE IN AN UNSAFE CAR TO GET THE SITUATION CORRECTED. THIS SITUATION IS BEING EXPERIENCED BY OTHER DRIVERS AND OTHERS CAN BE FOUND WITH A SIMPLE GOOGLE SEARCH.
ON OCTOBER 7TH, 2014 THE KEY WOULD NOT COME OUT OF THE KEY SLOT. THE KEY IS NOT REQUIRED TO BE INSERTED TO START THE CAR BUT SIMPLY WITH YOU. HOWEVER, MY DAUGHTER HAD BORROWED THE CAR AND INSERTED THE KEY SO I HAVE NO WAY OF KNOWING IF THIS FAILURE OCCURRED ON THE DATE MENTIONED OR EARLIER. IT WAS IN FOR SERVICE ON AUGUST 25TH, 2014 SO SOMETIME BETWEEN THE TWO DATES THE FAILURE OCCURRED. I TOOK IT TO OUR LOCAL DEALER, MINI OF DES MOINES, AND THEY ALSO COULD NOT REMOVE THE KEY. THEY NOTICED THAT WITHOUT THE CAR RUNNING AND THE BRAKE PEDAL NOT DEPRESSED THE AUTOMATIC TRANSMISSION SHIFTER COULD BE MOVED TO ANY POSITION. THEY DID NOT KNOW IF THIS WOULD OCCUR WITH THE CAR RUNNING, I.E. INADVERTENTLY HITTING THE SHIFTER INTO REVERSE OR PARK WHILE DRIVING. THEY ALSO DID NOT KNOW IF THE CAR WAS ACTUALLY IN PARK WHEN INDICATED SO. I LEFT THE CAR, WAS GIVEN A LOANER, AND WHEN THEY CALLED ME THE DIAGNOSIS WAS THAT LIQUID HAD SPILLED IN A CUP HOLDER AND LEAKED THROUGH THE UNSEALED SCREW IN THE BOTTOM ONTO AN ELECTRICAL COMPONENT CAUSING THE PROBLEM. I AM WELL AWARE OF LIQUID SPILLING INTO THE CUP HOLDER AS THIS HAPPENED A COUPLE OF TIMES WHEN I FIRST GOT THE CAR DUE TO THE SPRING LOADED HOLDERS IN THE SIDE OF THE CUP HOLDER THAT I THEN REMOVED . THEY ARE ENGINEERED INCORRECTLY AND ALTHOUGH THE MANUAL STATES TO USE "LIGHTWEIGHT, NON-BREAKABLE CONTAINERS" THESE SPRING RETAINERS WILL POKE A HOLE IN STYROFOAM CUPS AND WILL COMPRESS A PAPER CUP, LIKE STARBUCKS, ENOUGH THAT LIQUID WILL EXPEL THROUGH THE TOP VENT HOLE AND DRINKING SLOT. IN ADDITION, WHILE ONE WOULD ASSUME THAT LIQUID WOULD OCCASIONALLY BE SPILLED IN A CUP HOLDER, AN ADDITIONAL ENGINEERING ERROR WAS MADE WHEN NO SEALING WASHER WAS USED ON THE RETAINING SCREW IN THE BOTTOM AND ANY LIQUID THE WOULD LEAK ON TO ANOTHER UNSEALED COMPONENT AND CAUSE THIS FAILURE. A $1,100.00 REPAIR COST FOR BMW'S INEPT ENGINEERING???
ON OCTOBER 7TH, 2014 THE KEY WOULD NOT COME OUT OF THE KEY SLOT. THE KEY IS NOT REQUIRED TO BE INSERTED TO START THE CAR BUT SIMPLY WITH YOU. HOWEVER, MY DAUGHTER HAD BORROWED THE CAR AND INSERTED THE KEY SO I HAVE NO WAY OF KNOWING IF THIS FAILURE OCCURRED ON THE DATE MENTIONED OR EARLIER. IT WAS IN FOR SERVICE ON AUGUST 25TH, 2014 SO SOMETIME BETWEEN THE TWO DATES THE FAILURE OCCURRED. I TOOK IT TO OUR LOCAL DEALER, MINI OF DES MOINES, AND THEY ALSO COULD NOT REMOVE THE KEY. THEY NOTICED THAT WITHOUT THE CAR RUNNING AND THE BRAKE PEDAL NOT DEPRESSED THE AUTOMATIC TRANSMISSION SHIFTER COULD BE MOVED TO ANY POSITION. THEY DID NOT KNOW IF THIS WOULD OCCUR WITH THE CAR RUNNING, I.E. INADVERTENTLY HITTING THE SHIFTER INTO REVERSE OR PARK WHILE DRIVING. THEY ALSO DID NOT KNOW IF THE CAR WAS ACTUALLY IN PARK WHEN INDICATED SO. I LEFT THE CAR, WAS GIVEN A LOANER, AND WHEN THEY CALLED ME THE DIAGNOSIS WAS THAT LIQUID HAD SPILLED IN A CUP HOLDER AND LEAKED THROUGH THE UNSEALED SCREW IN THE BOTTOM ONTO AN ELECTRICAL COMPONENT CAUSING THE PROBLEM. I AM WELL AWARE OF LIQUID SPILLING INTO THE CUP HOLDER AS THIS HAPPENED A COUPLE OF TIMES WHEN I FIRST GOT THE CAR DUE TO THE SPRING LOADED HOLDERS IN THE SIDE OF THE CUP HOLDER THAT I THEN REMOVED . THEY ARE ENGINEERED INCORRECTLY AND ALTHOUGH THE MANUAL STATES TO USE "LIGHTWEIGHT, NON-BREAKABLE CONTAINERS" THESE SPRING RETAINERS WILL POKE A HOLE IN STYROFOAM CUPS AND WILL COMPRESS A PAPER CUP, LIKE STARBUCKS, ENOUGH THAT LIQUID WILL EXPEL THROUGH THE TOP VENT HOLE AND DRINKING SLOT. IN ADDITION, WHILE ONE WOULD ASSUME THAT LIQUID WOULD OCCASIONALLY BE SPILLED IN A CUP HOLDER, AN ADDITIONAL ENGINEERING ERROR WAS MADE WHEN NO SEALING WASHER WAS USED ON THE RETAINING SCREW IN THE BOTTOM AND ANY LIQUID THE WOULD LEAK ON TO ANOTHER UNSEALED COMPONENT AND CAUSE THIS FAILURE. A $1,100.00 REPAIR COST FOR BMW'S INEPT ENGINEERING???