This Problem Across All Years
The digital dash is delaminating and makes it hard to see all of the safety items displayed on the dash. Everything is distorted, this is a SAFETY ISSUE. This is a know issue that occurs on many Freightliner products. ( The chassis is Freightliner ) Freightliner will not accept any responsibility beyond the normal warranty timeframe. Freightliner wants $ 7,000.00 ~ for the repair and then how long will this last?? I appears that this is a major issue for Freightliner chassis, and you have to do is google it and many posts come up discussing this problem. Apparently auto manufactures know how to make a digital dash that does not delaminate.
The digital dash is delaminating and makes it hard to see all of the safety items displayed on the dash. Everything is distorted, this is a SAFETY ISSUE. This is a know issue that occurs on many Freightliner products. ( The chassis is Freightliner ) Freightliner will not accept any responsibility beyond the normal warranty timeframe. Freightliner wants $ 7,000.00 ~ for the repair and then how long will this last?? I appears that this is a major issue for Freightliner chassis, and you have to do is google it and many posts come up discussing this problem. Apparently auto manufactures know how to make a digital dash that does not delaminate.
The Freightliner chassis under this motorhome uses a Power Distribution Module (PDM) that is a fuse panel "block" that powers several coach items, from taillights, brake lights, engine cooling, air conditioning and several other components. The PDM intermittently fails as it can't support the amount of power it must distribute without overheating and shutting off several components as you drive. Especially dangerous is the lost of rear brake and taillights. The PDM was recalled by Freightliner and was replaced with the same item. I'm only guessing that they thought they had a bad batch and replacing it with another would solve the issue. The replacements failed and they recalled the product again. This time, they left the failed PDM in place and removed several circuits from the unit and ran them outside of the PDM with their own fuses. Again, I think the idea was to reduce how much amperage the unit had to handle. This bypass repair is still failing on some coaches, and Freightliner is refusing to cover the repair under the initial recall.
The Freightliner chassis under this motorhome uses a Power Distribution Module (PDM) that is a fuse panel "block" that powers several coach items, from taillights, brake lights, engine cooling, air conditioning and several other components. The PDM intermittently fails as it can't support the amount of power it must distribute without overheating and shutting off several components as you drive. Especially dangerous is the lost of rear brake and taillights. The PDM was recalled by Freightliner and was replaced with the same item. I'm only guessing that they thought they had a bad batch and replacing it with another would solve the issue. The replacements failed and they recalled the product again. This time, they left the failed PDM in place and removed several circuits from the unit and ran them outside of the PDM with their own fuses. Again, I think the idea was to reduce how much amperage the unit had to handle. This bypass repair is still failing on some coaches, and Freightliner is refusing to cover the repair under the initial recall.
The area on the dash where you read all the gauges is delaminating. This is a hazard as the gauges are hard to see and affected
The area on the dash where you read all the gauges is delaminating. This is a hazard as the gauges are hard to see and affected
The Freightliner instrument cluster (ICU) screen delaminates and makes it difficult to read the gauges. This issue appears to happen with a lot of 2019 models. Freighter refuses to assist and the cost is $5700 for the cluster + labor.
The Freightliner instrument cluster (ICU) screen delaminates and makes it difficult to read the gauges. This issue appears to happen with a lot of 2019 models. Freighter refuses to assist and the cost is $5700 for the cluster + labor.
The Freightliner instrument cluster (ICU) screen delaminates and makes it difficult to read the gauges. This issue appears to happen with a lot of 2019 models. Freighter refuses to assist and the cost is $5700 for the cluster + labor.
The Freightliner instrument cluster (ICU) screen delaminates and makes it difficult to read the gauges. This issue appears to happen with a lot of 2019 models. Freighter refuses to assist and the cost is $5700 for the cluster + labor.
THE INSTRUMENT LIGHT PANEL (OPTIVIEW) DOES NOT DIM ENOUGH AND IS TOO BRIGHT AT NIGHT MAKING IT VERY DIFFICULT TO SEE OUTSIDE THE VEHICLE WHEN DRIVING AT NIGHT. ON A DARK RAINY NIGHT THE GLARE FROM THE INSTRUMENT PANEL MAKES FOR DANGEROUS DRIVING CONDITIONS. MY COMPLAINT TO NEWMAR IN APRIL 2019 WAS DEFERRED TO FREIGHTLINER. NOVEMBER OF 2019 FREIGHTLINER SENT TWO TECHNICIANS TO MY HOME WHO SPENT A COUPLE OF HOURS DIAGNOSING AND TAKING PICTURES OF THE PROBLEM. THEY CONCLUDED THE BRIGHTNESS LEVEL OF THE INSTRUMENT PANEL DID DIM IN RESPONSE TO THE SWITCH BUT MAY NOT BE CALIBRATED CORRECTLY. THEY CONCLUDED THAT PROBLEM WAS WITH THE SOFTWARE FROM THE OPTIVIEW VENDOR AND THAT THEY WOULD RESEARCH A SOFTWARE UPDATE WITH THEM AND GET BACK TO ME. THEY NEVER GOT BACK TO ME, WOULD NOT RETURN MY CALLS AND SUBSEQUENT COMPLAINTS ABOUT THE BRIGHTNESS HAVE BEEN WRITTEN OFF AS " THIS IS NORMAL". MY SOLUTION TO THE PROBLEM HAS BEEN TO AVOID NIGHT DRIVING AND WHEN I MUST DRIVE AT NIGHT I COVER THE PANEL WITH A PAPER TOWEL OR SUN SCREEN. I BELIEVE A SIMPLE SOFTWARE UPDATE WOULD ALLEVIATE THIS POTENTIALLY DANGEROUS CONDITION. *TR
THE INSTRUMENT LIGHT PANEL (OPTIVIEW) DOES NOT DIM ENOUGH AND IS TOO BRIGHT AT NIGHT MAKING IT VERY DIFFICULT TO SEE OUTSIDE THE VEHICLE WHEN DRIVING AT NIGHT. ON A DARK RAINY NIGHT THE GLARE FROM THE INSTRUMENT PANEL MAKES FOR DANGEROUS DRIVING CONDITIONS. MY COMPLAINT TO NEWMAR IN APRIL 2019 WAS DEFERRED TO FREIGHTLINER. NOVEMBER OF 2019 FREIGHTLINER SENT TWO TECHNICIANS TO MY HOME WHO SPENT A COUPLE OF HOURS DIAGNOSING AND TAKING PICTURES OF THE PROBLEM. THEY CONCLUDED THE BRIGHTNESS LEVEL OF THE INSTRUMENT PANEL DID DIM IN RESPONSE TO THE SWITCH BUT MAY NOT BE CALIBRATED CORRECTLY. THEY CONCLUDED THAT PROBLEM WAS WITH THE SOFTWARE FROM THE OPTIVIEW VENDOR AND THAT THEY WOULD RESEARCH A SOFTWARE UPDATE WITH THEM AND GET BACK TO ME. THEY NEVER GOT BACK TO ME, WOULD NOT RETURN MY CALLS AND SUBSEQUENT COMPLAINTS ABOUT THE BRIGHTNESS HAVE BEEN WRITTEN OFF AS " THIS IS NORMAL". MY SOLUTION TO THE PROBLEM HAS BEEN TO AVOID NIGHT DRIVING AND WHEN I MUST DRIVE AT NIGHT I COVER THE PANEL WITH A PAPER TOWEL OR SUN SCREEN. I BELIEVE A SIMPLE SOFTWARE UPDATE WOULD ALLEVIATE THIS POTENTIALLY DANGEROUS CONDITION. *TR